Tools

Single Manifold Guage with sight glass:

One Valve Manifold with sight glass Suitable for all gases
·Bourdon gauges 80mm/ 68mm
·Scale bar/psi/℃
·Connections 3xl/4″SAE
·Gauges cl 1.6 pulse-free
·Anodized aluminum block body
·One full turn open/close valve
·Super strong 100% Teflon diaphragms
·No-flutter gauge design
·Extra large knobs for easy grip

Vibration Absorber:

REF-WELL Vibration Absorber model series are designed to install in the suction and discharge lines of air conditioning and other refrigeration systems to reduce vibration in the transmission of compressor-induced vibration through system piping.
These are produced by deep pitch corrugated rubbing for increasing flexibility and vibration absorption, covered by high tensile wire braid for superior strength.These are further tested for pressure and then carefully vacuum tested by using a highly sensitive helium mass spectrometer leak detection device.

Hydraulic Tube Expander:

• Manual hydraulic mechanism design can expand from 10mm to 42mm O.D.
• Tubing easily with less effort.
• Expander segments are made of high-quality hardened steel.
• Used for soft copper tube, aluminum tube, titanium tube, soft steel and other soft tube.

Small Tube Cutter:

• Cutting copper、titanium、stainless steel and aluminum tubing.
• Tube cutter stays the same length for use in restricted area.
• Smooth groove in rollers can stabilize demaged flares and cut it easily.
• Special 65Mn material blade, cut tubing more sharp and accurate.
• With a spare blade in it.
• Cuts from 1/8 to 5/8 and 1-1/8 sizez

Normal Tube Cutter:

• Cutting copper、titanium、stainless steel and aluminum tubing.
• Tube cutter stays the same length for use in restricted area.
• Smooth groove in rollers can stabilize demaged flares and cut it easily.
• Special 65Mn material blade, cut tubing more sharp and accurate.
• With a spare blade in it.
• Sizez from 1/8-11/8 and 1/4-15/8.

Expanding Tool:

This is a high- tech product specially designed flaring tools for HVAC/R field use. With high capacity charging batteries, they can flare different sizes of brass, aluminum, PVC tubings. Its features are:

• High capacity provide driving power
• Adjustable inside punch for different depth & sizes
• Auto retract expander heads with alarm functions
• Different sizes of expander heads available
• Easy operation, used for 10mm~42mm. diameter tubings

Flaring Set Heavy:

• Easy operation, and save time and energy.
• The special cone eccentric revolution will be allows the internal opening gradually and form 45°accurate and regular flare without, preventing tube slippage downward. Therefore, the flare face will be smooth, uniform without scratching.
• Eccentric cone will be rebound by itself after the work is finished, make the idle top head in revolution again for 1-2 rounds and have the flare face in friction to make it prettier.
• Flares sizes from 1/4 to 3/4 OD.

Eccentric Cone Type Flaring Tool:

• Insert tubing into adjustable opening of tube holding assembly. Position end of  tubing approximately 1/8″above the surface of holder.
• Tighten clamp screw approximately 1/2 to 3/4of a turn beyond free travel position to secure tubing.
• Be certain flaring cone surface is oiled. Slip yoke over tube holding assembly centering on tubing. Twist clockwise to lock in position. Turn handle clockwise to flare.
• Sizes flared from 3/16 to 5/8 OD.

45 Degree Diamond Type Flaring & Burnishing Tool:

• Share in metric & inch.
• The bar is special steel sheet material.
• Unique, adjustable tube holding mechanism permits flaring any size tubing within the range.
• The single rolling operation can provide a precise 45° frange and deburring.
• Slip-on self-centering yoke permits use in tight quarters.
• Large handle, with better leverage, and precise threads on feed screw make flaring effortless.
• Flares from 3/16 to 5/8 OD.

Weighing Scale:

Air Conditioner Cleaning Cover:

• Made from water-proof material PVC.
• It is specially designed to attach to your air conditioning unit with a strong elastic band
• Effectively collects waste water after cleaning/washing
• Washable and can be re-used again and again
• Suit for wear onto any split air conditioner unit
• Easy to carry, easy to fold and unfold, easy to pack

Inspection Mirror:

Mirror O.D.(mm)               50
Length closed(mm)            200
Length open(mm)              410
Diameter(mm)                 10

Deluxe Oil Charging Pump:

• Remove oil for recovery and conversion
• Add oil to existing systems
• Pumps 75 ml per stroke
• Fits all size oil containers
• Foot stand base provides support and leverage while pumping against the high pressures of a running compressor
• Operating unit in reverse with adapter hose accessory removes oil from equipment quickly and efficiently
• Use with alkyl-benzene, ester-based, polyol ester, mineral and synthetic oils
• Will pump against 250 psi pressure
• Hose connect 1/4 or 3/8 SAE